The standard Sportsman Target System starts with a 24″ x 12″ 3/8” SR500 steel plate that hangs naturally at 20 degrees that freely swings. Armored thru-pins affix the target to the hanging bar (no bolts to break, rust, or tighten). Reversing the target involves only the removal and re-attachment of the linch pins situated safely behind the target.
The target easily affixes to a standard 2×4 that is held in place by our no-tip multi-stand. The stand adapts for training with paper targets by sliding either 1×2’s or 2×2’s into pre-configured holes at 18” and 24” widths.
Total weight: Approx 60 lbs.
Optional .5” SR500 plate available
We recently added an optional 32″ hanging vertical piece of vertical armor should you want to protect the 2×4 as well. Simply slide it over the horizontal support bracket, then hang your target and go.
We have made some changes on the hanging system for the Sportsman Series to accomodate maxium flexiblity in application. The new hanging bar can accept optional vertical post armor, it has a 1.3″ hole to thread a shaft, optional quick-change no-tool keyways to accommodate T-Posts, holes for bolts and carriage bolts, and an optional quick-swap hanging bar with hook to use any number of targets with a .5″ center hole for hanging in that manner. The Sportsman Series Steel multi-purpose Target bases can be used for Steel and Paper (18″ & 24″ wide – 1×2’s or 2×2’s)
While AR500 steel has long been used for abrasion resistance and shooting targets, SR500 steel offers enhanced ballistic performance specifically engineered for firearm impacts.
| Feature | AR500 Steel | SR500 Steel |
|---|---|---|
| Intended Use | Abrasion / Wear | Ballistic / Shooting |
| Hardness Consistency | Varies | Guaranteed ≥500 BHN |
| Pitting Resistance | Good | Excellent |
| Ricochet Control | Standard | Improved |
| Service Life | Good | Superior |
For shooters and ranges who prioritize safety, durability, and ballistic performance, SR500 steel from SSAB is the superior alternative to traditional AR500.