"Sportsman Series" | High Quality, Versatile, Durable, & Transportable.

The standard Sportsman Target System starts with a 24″ x 12″ 3/8” SR500 steel plate that hangs naturally at 20 degrees that freely swings. Armored thru-pins affix the target to the hanging bar (no bolts to break, rust, or tighten). Reversing the target involves only the removal and re-attachment of the linch pins situated safely behind the target.

The target easily affixes to a standard 2×4 that is held in place by our no-tip multi-stand. The stand adapts for training with paper targets by sliding either 1×2’s or 2×2’s into pre-configured holes at 18” and 24” widths.

Total weight: Approx 60 lbs.
Optional .5” SR500 plate available

We recently added an optional 32″ hanging vertical piece of vertical armor should you want to protect the 2×4 as well. Simply slide it over the horizontal support bracket, then hang your target and go. 

We have made some changes on the hanging system for the Sportsman Series to accomodate maxium flexiblity in application. The new hanging bar can accept optional vertical post armor, it has a 1.3″ hole to thread a shaft, optional quick-change no-tool keyways to accommodate T-Posts, holes for bolts and carriage bolts, and an optional quick-swap hanging bar with hook to use any number of targets with a .5″ center hole for hanging in that manner. The Sportsman Series Steel multi-purpose Target bases can be used for Steel and Paper (18″ & 24″ wide – 1×2’s or 2×2’s) 

Standard Base Width

Wide Base Width

Paper Target Stand

Built with SR500

Downloand Data Sheet

SR500 vs AR500 Steel | Ballistic Steel Comparison | Shooter First LLC

Why Choose SR500 Over
Standard AR500 Steel?

While AR500 steel has long been used for abrasion resistance and shooting targets, SR500 steel offers enhanced ballistic performance specifically engineered for firearm impacts.

Key Benefits of SR500 Steel

  • Purpose-Built for Ballistics
    SR500 is engineered for shooting targets and range use, unlike AR500 which was originally designed for industrial wear applications.
  • Higher, More Consistent Hardness
    A guaranteed minimum hardness of 500 Brinell improves resistance to pitting, cratering, and surface damage.
  • Improved Shooter Safety
    Reduced surface deformation helps minimize unpredictable ricochets and splash-back.
  • Longer Target Life
    SR500 steel targets maintain a smooth, safe surface longer than standard AR500 under heavy use.
  • Strength Without Excess Weight
    SR500 can often be used in thinner profiles while maintaining ballistic integrity.

SR500 vs AR500 Steel Comparison

Feature AR500 Steel SR500 Steel
Intended Use Abrasion / Wear Ballistic / Shooting
Hardness Consistency Varies Guaranteed ≥500 BHN
Pitting Resistance Good Excellent
Ricochet Control Standard Improved
Service Life Good Superior

The Bottom Line

For shooters and ranges who prioritize safety, durability, and ballistic performance, SR500 steel from SSAB is the superior alternative to traditional AR500.